no water pressure thru hot water side

[dustinl]

i have water pressure thru my cold water handles but no water pressure thru hot water side currently raining here but it doesn't appear to me that anything is leaking. i am hooked up to the water supply

[Roger10378]

allen8106 wrote:

Roger10378 wrote:
If it was working and then quit without you doing anything it is probably the check valve on the output of the water heater.

Obviously I've not seen all RV hot water heaters but I've never seen a check valve on an RV hot water heater.

Only the water heaters with 3 valve winterizing systems don't have a check valve.

[howardwheeler]

I had this exact problem and it was the check valve. I completely removed mine as I don’t need to winterize.

[allen8106]

Roger10378 wrote:
If it was working and then quit without you doing anything it is probably the check valve on the output of the water heater.

Obviously I've not seen all RV hot water heaters but I've never seen a check valve on an RV hot water heater.

[laknox]

dustinl wrote:
fixed, thanks ill post another question about a clogged toliet soon

So, it =was= the check valve?

Lyle

[dustinl]

fixed, thanks ill post another question about a clogged toliet soon

[Roger10378]

Remove the pex from the check valve and you will probably be able to remove the loose bits of the check valve. Reinstall the fitting and you will be good to go. Just replace the check valve before it is time to winterize if you use the pink antifreeze. I do not use antifreeze when I winterize mine so I didn't replace the check valve.

[Me_Again]

dustinl wrote:

Roger10378 wrote:
If it was working and then quit without you doing anything it is probably the check valve on the output of the water heater.

how do I check this?

Replace it. Get the brass one to replace what is most likely a plastic one. Chris

[dustinl]

Roger10378 wrote:
If it was working and then quit without you doing anything it is probably the check valve on the output of the water heater.

how do I check this?

[rv2go]

Roger10378 wrote:
If it was working and then quit without you doing anything it is probably the check valve on the output of the water heater.

. X2

[Roger10378]

If it was working and then quit without you doing anything it is probably the check valve on the output of the water heater.

[EV2]

Do you have the water line bypass valve to the water heater closed?