Steps will not close. Door magnetic switch is functioning. Light under steps remains on always. When measuring voltage at the magnetic switch I get 0 volts when door is open and 0.6 volts when door is closed. Should I not be getting 12 volts at switch?
GrampaKoot says...la vida es corta para aรฑejar el vino
If you hear the control module under the step click when you open and close the door then the motor/gear box is jammed up. You can remove the assembly and take it apart, clean, lube, and reassemble. Mine did this twice.
There is two grounds under the step. one large and one small. Fuses for many are in the battery control center. One should be on chassis battery system and other on coach battery system.
The Magnet works off a Ground(negative) feed. When you open and close the door, the step light should come ON when the door is opened and go OFF when it closes. The White and RED wire at the 4 wire quick connect should have 12 volts when the manual step on and off switch is ON on your year model. From your description the problem is the 2 wires going from the magnetic switch. Doug
Thank you Bud. I have verified that the ground to the switch itself is good continuity test with multimeter. Would you be able to point me to the fuses and other ground please. Phil.
GrampaKoot says...la vida es corta para aรฑejar el vino
