โApr-18-2015 07:43 PM
โApr-21-2015 09:36 AM
โApr-21-2015 04:19 AM
The screen doesn't change when this happens. It shows 118v and 119v.
โApr-20-2015 05:25 PM
โApr-20-2015 05:19 PM
iradi8 wrote:
measured the input voltage on both lines while monitoring for the disconnect and it disconnected several times with no movement on the voltage meter on either input line.
โApr-20-2015 04:40 PM
โApr-19-2015 09:57 AM
iradi8 wrote:
They came out and checked it out at the post and it was fine.
โApr-19-2015 08:58 AM
โApr-19-2015 08:54 AM
โApr-19-2015 06:58 AM
โApr-19-2015 06:37 AM
prstlk wrote:
You might try another cg or even a differant site. You may not be getting clean power and your suppressor may be trying to tell something, but it may not know how.
โApr-18-2015 10:48 PM
โApr-18-2015 08:00 PM