โFeb-06-2014 05:46 AM
โMar-28-2014 08:11 AM
โMar-27-2014 11:07 AM
โMar-26-2014 08:05 PM
โMar-26-2014 07:29 PM
โMar-26-2014 07:17 PM
indyzmike wrote:
I too like all of the ideas including pics. I do have one suggestion on the GFCI outlet install. I had an outlet on the outside wall of my camper and water leaked in through the outlet gasket. I took the gasket out and sealed around the outlet with sealer. I would not trust the gasket to seal long term.
โMar-26-2014 07:17 PM
ron.dittmer wrote:
Thank you for sharing your experience and projects. You are quite a creative guy, obviously having a great time in making your motor home your own and how it will serve you and your family.
Regarding your transmission cooling efforts, are there inherent transmission cooling deficiencies with the GM chassis? Are you planning on towing something heavy? Or was it done simply for assurance?
โMar-26-2014 05:31 PM
โMar-26-2014 10:03 AM
โMar-26-2014 09:50 AM
โMar-26-2014 09:44 AM
โMar-26-2014 09:38 AM
Its_Hondo wrote:
Also, I chose to use the 12v & switch to control the Glowshift Temp gauge lighting because I really didn't want to dig into the wiring too much & hunt for a lighting wire. As a side note, if I had known about the Scangauge 2 before hand I wouldn't have installed the external trans temp gauge.
โMar-26-2014 09:20 AM
โMar-26-2014 08:59 AM
โMar-25-2014 09:55 PM
โMar-24-2014 07:01 PM