It is possible to "Re-task" the park cable in most RV's Depending on your video selector I will tell you how to do it.
Box of many buttons: Disconnect the cable connected to the jack marked CABLE on the back of the box. this is it. Connect this cable to teh LNB jack on your VIP-211.
Wall plate. On the back side there should be 3 cables. it's the one in the middle,, Connect RF out from the sat receiver to the jack you disconnect the cable from.
Now: Why you SHOULD NOT do this, 2 reasons
You may,, Find yourself under heavy tree cover in a park with cable and wish to use the cable instead.. But you have disabled that feature.
But even more important.. On my rig that cable is over fifty feet of RG-59.. Or, in Sat antenna terms over 200 electrical loss feet long, POssibly longer.
(My RV is wired with low bidder RG-59, Average RG-59 has about 4x the loss per foot of Average RG-6 which is the cable SPECIFIED for sat antenna use... Quality RG-6 is even better, and lowest bidder.. (both types) not as good.
TOP quality RG-59 is about the same as bargain barrel RG-6 but trust me. You don't have top quality RG-59
Source. Belden Cable via ARRL handbook.
Home was where I park it. but alas the.
2005 Damon Intruder 377 Alas declared a total loss
after a semi "nicked" it. Still have the radios
Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times