cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

50 amp pedastal/extension

Grey_Mountain
Explorer
Explorer
What size wire should be used for a 50amp RV plug? I have an ample supply of 4AWG, 6AWG and 10AWG but no 8AWG. Is the 4 and 6 overkill?
I will be visiting friends later and plan to park in their driveway. I want to intall a 50amp breaker in their main breaker box, run a short extension, maybe 10 feet, then hook to that.
Suggestions?

GM
2006 Discovery 39S Tin Teepee
Honda CR-V Toad
Enrolled member of the Comanche Tribe
English Bride
Bichon Frise bear killers:
Lord Shonefeld von Reginald-Friese IV.
Lady Annabelle von Lichenstein-Friese III.
22 REPLIES 22

KD4UPL
Explorer
Explorer
#6 would be appropriate for the hot wires. You could use #6 for the neutral or drop down to a #8. You only need a #10 for the ground.
An RV 50 amp is EXACTLY like a residential 4 wire range connection.
Electric household dryers do operate on #10 wire on a 30 amp circuit. Electric ranges are not #10, they are often run with #8 on a 40 amp breaker or #6 on a 50 amp.

BFL13
Explorer II
Explorer II
Interesting-- that one says.

"RECOMMENDED wire sizes for 50-amp: 25 feet - #8, 50 feet - # 6 and 100 feet - #4. You may get along
fine with longer runs."
1. 1991 Oakland 28DB Class C
on Ford E350-460-7.5 Gas EFI
Photo in Profile
2. 1991 Bighorn 9.5ft Truck Camper on 2003 Chev 2500HD 6.0 Gas
See Profile for Electronic set-ups for 1. and 2.

wolfe10
Explorer
Explorer
Yes, CAREFUL HERE!

AN RV 50 amp connection is the same as in a house:

TWO hots-- the two outer straights
One neutral-- center straight
One ground-- center round
Brett Wolfe
Ex: 2003 Alpine 38'FDDS
Ex: 1997 Safari 35'
Ex: 1993 Foretravel U240

Diesel RV Club:http://www.dieselrvclub.org/

time2roll
Nomad
Nomad
BFL13 wrote:
Be very careful to stick to 120v and not get mixed up with household 240v like with a stove or dryer. Get lots of sad reports of people hooking up "RV" plug-ins at stick houses that turn out to be 240 and they fry everything in their RVs.

Standard 50 amp RV connector is NEMA 14-50 with 240/120 volt four wire service same as the common range connector in a home.

http://www.myrv.us/electric/index.htm

BFL13
Explorer II
Explorer II
EDIT--comment below relates to 30a/120v and does not apply to 50a/240.

Be very careful to stick to 120v and not get mixed up with household 240v. Get lots of sad reports of people hooking up "RV" plug-ins at stick houses that turn out to be 240 and they fry everything in their RVs.

ISTR the 30 amp cord in a 30a RV is made up of #10 wires, but no idea what a 50 amp cord has.
1. 1991 Oakland 28DB Class C
on Ford E350-460-7.5 Gas EFI
Photo in Profile
2. 1991 Bighorn 9.5ft Truck Camper on 2003 Chev 2500HD 6.0 Gas
See Profile for Electronic set-ups for 1. and 2.

Artum_Snowbird
Explorer
Explorer
Of course much of this depends on what you plan to use while visiting those friends. The idea that you would need a full 50 amp circuit while you stay is excessive, but if you need to have two air conditioners running and more at the same time, well you might need it.

And Hi from Campbell River. Will you be taking the country by force again this year?
Mike
2012 Winnebago Impulse Silver 26QP
2005 16.6 Double Eagle
2018 Jeep Wrangler JK
previously Snowbird Campers,
Triple E Motorhome and Fifth Wheel

time2roll
Nomad
Nomad
10 feet #8 s/b OK but generally #6 is minimum. #10 would be a fuse.

Lwiddis
Explorer II
Explorer II
Within reason you can never โ€œoverkillโ€ on wiring.
Winnebago 2101DS TT & 2022 Chevy Silverado 1500 LTZ Z71, WindyNation 300 watt solar-Lossigy 200 AH Lithium battery. Prefer boondocking, USFS, COE, BLM, NPS, TVA, state camps. Bicyclist. 14 yr. Army -11B40 then 11A - (MOS 1542 & 1560) IOBC & IOAC grad