I have a 2018 cedar creek 34rl2. This morning was chilly turned temp up, furnace ran to temp then shut off. I went to turn temp back down and the thermostat was lit up, tried to turn temp down and thermostat would not respond, tried diff. Zones,modes,temps, inside temp, nothing changes, it wonโt shut off nothing, nada! Was going to try a reset but itโs still powered up. If I remove it from the wall it will power off and after 5 min when I plug it back in I get the very same screen , furn , zone 1, 76 degrees and auto fan. Is it toast, can I reset when I canโt turn it off like manual? Dan
2017 Dodge Ram Big Horn 3500 HD Cummins
2018 Cedar Creek 34RL2
Navy CPO Retired, Jan (DW), and Ziggy (Cat)