Link To Good Value .315" 4 to 1 Heat Shrink Tubing

[MEXICOWANDERER]

http://www.ebay.com/itm/151786109371?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

.250" is 1/4" and .375" is 3/8" so this stuff in t'ween.

.315 max shrink down to .079" or around 1/12" inch

Black, medium wall, adhesive lined. Good for 8-gauge and smaller. Good reinforcement for discrete component leads, gross diameter differences. Four to one is normally pretty pricey. These are thirty nine point six inch lengths, not four feet.

[MEXICOWANDERER]

Just ordered 15-lengths. Fifteen meters. Not quite 50 feet. Buck and a half shipping for all. This outfit also has red black and clear shrink tubing. Three and four to one shrink ratios. Up to inch and a half diameter before shrinking. RAYCHEM must be flipping in their grave. have to wait and see what I have left over after buying an ND air conditioning compressor next month.