cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

wind sensor 2001 monaco

klutchdust
Explorer II
Explorer II
The latest issue is the two cup wind sensor for the awning . Well one side broke off and owner would like it repaired. Is the plastic cup" twirly thing "replaceable, the awning is a girard. my search hasn't come up with

much.

I have seen replacement cups, some have three. Will that change the sensor reading/ speed reading? We can fabricate anything to make it work if that is an issue.
4 REPLIES 4

Ivylog
Explorer III
Explorer III
I did much the same as Twomed but in less than six months it came off somewhere. I bough this recently but have not put it on yet. There is an adjustment on the board to set at how much wind it comes in.
This post is my opinion (free advice). It is not intended to influence anyone's judgment nor do I advocate anyone do what I propose.
Sold 04 Dynasty to our son after 14 great years.
Upgraded with a 08 HR Navigator 45โ€™...

Twomed
Explorer
Explorer
Girard wind sensor wind cups. Just bought replacement wind cups from LaCrosse Technology at service@lacrossetechnologyoutlet.com for $9.95 + $3.09 fgt. = $13.04 LaCrosse Technology at service@lacrossetechnologyoutlet.com for $9.95 + $3.09 fgt. = $13.04 Beats Girard replacement price of $142.00.
Old sensor cups are on a splined shaft which can be removed with wide blade screwdrive on one side and fingers on other to pull up and off.
The replacement is a "WS-2010-15 Cups G1" from above. Had to drill new sensor hole larger with 9/64" drill and then just press. ๐Ÿ™‚

Much cheaper fix
From BAC website ๐Ÿ™‚ ๐Ÿ™‚
Happy Trails ๐Ÿ™‚
06 Monaco Dynasty
07 Hummer H3
FMCA 279843

klutchdust
Explorer II
Explorer II
Altern wrote:
Girard is located nearby in San Clemente.

Give then a call: http://www.girardrv.com/rv/


great, thanks

Altern
Explorer
Explorer
Google says Girard is located nearby in San Clemente.

Give them a call: http://www.girardrv.com/rv/