Anyone have any ideas why my oem clutch started squeaking when my foot presses down? The truck is a 2004.5 with the nv5600 transmission. It has a 148000 miles on it and the clutch still works.
Elwood & Kathy 36' CK3 Mobile Suite - 2006 2004 Dodge Ram Cummins 6 speed HO 600 373
The foot lever pivot points? When you take off from a start? When the engine is running? When the engine is off? Does the pitch change with rpm? What else?
Otherwise there is a certain amount of metal rubbing when you press the foot peddle so just apply some forgetaboutit.
Depends on where the noise is. Does the noise occur while you press the clutch in and continues while you have the clutch pressed? Or does it just occur while the clutch is moving and stops when the clutch stops moving? Does it occur while pressing the clutch down, but not when letting it out, or vice versa?
And you need to replace the clutch assembly (clutch disk, pressure plate, and throw out bearing at minimum. Maybe even the flywheel too if itโs a dual-mass type) before the bearing comes apart. If that happens, youโre stuck waiting for a tow. BTDT.
:):)
2001 Lance 1121 on a 2016 F450 โScuse me while I whinge. And for all you Scooby-Doo and Yosemite Sam typesโฆโฆโฆ..Letโs Go Brandon!!!
Amateur Radio Operator WW1SS . . . Flex 6500 PGXL and TGXL Steve and Joy 2014 Itasca Suncruiser 38Q . . . 2016 Lincoln MKX The Doodles, Abbie & Abel Baby and Kissie the Chihuahuas and Lucy the Biewere Yorkie