I hookup a aimes 2500 inverter to two 6 volt batteries. Seems all was good and working fine. When I was hook up to shore power the inverter would switch and start charging. Today I was hook up to a 110 outlet and all was fine until I turned on my a/c...
Im installing a AIMS 2500 Watt Low Frequency Pure Sine Inverter Charger 12 VDC to 120 VAC in my Rockwood 2506. Im hard wiring to the panel box. The positive wire on the battery terminal goes to the power jack and I think the electric brake before run...
The inverter is back ordered. I just found the manual online.Up to 10' of cable. Im using 1/0 awg with a 300w line fuse..From the manual:DC Input voltage Wire Gage1.2KW 12V 4 AWG2.5KW 12V 1/0 AWGhttps://www.aimscorp.net/documents/PICOGLF12W-25W12V120...
I was removing the existing converter. Why would I need it if the Aims inverter is a charger and has a ATS. Seems like Im getting conflicting information. Take a look at my diagram and tell me what you see wrong . Line by linethanks
If the 2500 WATT LOW FREQUENCY PURE SINE INVERTER CHARGER 12 VDC to 120 VAC has a switch to detect if voltage is low and then switches to dc why would I need another switch?
