Dometic DMR702. No error codes. On shore power or propane, fridge\freezer cools down. Seems to work great during the day. Temps 34'ish and -2.5'ish, right on target. Overnight, the temps go up a bit.. 42-45, 8-10. As the day warms up, the fridge gets...
I have been having a lot of trouble with my fridge. The pattern seems ambient temperature related. During the cool nights in the CO mountains off the grid, the unit would not run until about 10am. This past week it snowed about 10" and stayed near or...
sdtravis - Love your idea of a camera..I read your old post. IMO, it's your regulator(s). This is a cheap fix. At minimum, a little money well spent for a far better, longer lasting product. At best, it cures your situation. (My trusted propane guy i...
I'm not 100% sure I have solved my ambient temperature problem. But, I do feel I am gaining ground on it. Since I started this thread, I have learned\done this:1. My electrode was bad. I replaced it.2. Frost on my tank is two fold A. If the ambient ...
Yes, nighttime temps in the 20's to lower 30's.I did a bit of internet digging after you posted about ambient temps. The issues range from "no problems to -20C" to "I had issues around 40F." Thinking about the physics side of this problem, it makes ...
My Articca Thermistor (snip-the-tip) has finally arrived. Since I could not test the factory installed, I am installing it.The directions say to mount it on the side .5-.8 inches from the fins. The factory thermistor is on the back wall about 6 inche...
Back home, food out of the fridge, time to run the thermistor test.Old-Biscuit says "Unplug the thermistor leads from lower circuit board (P2 connector at J3 --- S/B white leads)"Not sure what "P2 connector" means, but at J3 on the lower board there ...
