I have a 2022 Forrest River Surveyor. It has the “dreaded” Dometic WH-6GEA water heater in it. It’s my understanding that this water heater is supposed to run on gas alone, electric alone or on both at the same time. Mine only works on gas alone or g...
Basically the electric switch had the load wire hooked to the ground terminal and the other 2 terminals both had 12v feeds on them. Causing a loop while under load and that’s why my voltage disappeared. Crazy
Doug. That’s exactly what was wrong the switch for the gas was wired correctly but the switch for the electric part was wired all jacked up. It had a jumper wire for power coming fro The gas switch but was connected to the load terminal on the switch...
Yes 120v is present. The problem is that the 12v doesn’t go to the relay by way of the yellow wire when the electric switch is on by itself. For the electric to work the gas switch has to be on. It will run gas/electric and gas alone not electric alo...
The electrical switch supplies power (no ope circuit). The gas switch supplies power ( no open circuit) everything has power till the 6 pin connector is plugged in. It is actually more of a sign of a ground fault through the board but can’t find wher...
