I have a 1993 Winnebago Vectra with leaf spring suspension. the spring are new but the passenger side is about an inch or 2 lower than the driver side. How can that be corrected? I tried to have airbags installed but was told there wasn't enough spac...
it seems every time I fix one thing something else goes!I need to fix the furnace but I cannot even figure out how to remove it.from the outside all I have is the exhaust vents and on the inside a 12 by 4 inch vent on the floor. if I remove the vent ...
I am trying to replace a HEHR torque operator (http://www.rvwindow.com/Motorhome_Product_Details.aspx?productID=6647)in a 1993 Winnebago Vectra. the problem I'm having is I cannot figure out how to remove the old one! it seems like it is riveted and ...
the reason I had new leaf springs installed was because when I bought the MH used, it had an old airbag system (jet something...) which was destroyed. Some RV repair place installed a new system which never worked, bags would pop every time. after 6 ...
Ok, I figured out how to remove the furnace. I had to open the basement doors on each side of the furnace to find 4 screws holding the panel. Anyway I am now looking for a control board for it and I am wondering which I need. The furnace is a suburba...
I like the chainsaw idea!...I'll check this weekend for some screws to remove the panel, do you mean the whole piece of siding where the small exhaust is screwed in comes off?as far as what is wrong with the furnace, the fan comes on but it just blow...
