I have a small 13' TT with a dry weight of 850 lbs. On a recent trip I had some bearings burn out and the mechanic doing the replacement work commented that he was surprised that I'd made it 2500 miles on bias ply tires (6 ply equivalent). I though...
Here's a fun fact. I just looked around for narrower 14" tires and came across a p155/55R14. It's listed diameter is 21", which is LESS than 5.30-12, which is 21.9".https://simpletire.com/federal-p155-55r14-a55i4afa-tireshttps://www.etrailer.com/qu...
Lynnmor wrote:Don't see where you allowed for suspension movement.The 0.2" is between the sidewall of the tire and the outside of the wheel well - not much lateral movement in any kind of suspension unless something's broken. But still, not really e...
spoon059 wrote:12" rims? At 65 mph those things are moving, probably going 1200 RPMs. A standard 15" rim with tires is probably closer to 800 RPM. I would put the biggest wheel/tire combo that would fit under the fender if it was my trailer and I ...
theoldwizard1 wrote:Blowing smoke ! Nothing wrong with good quality tires as long as you are not exceeding the load capacity and are keeping them properly inflated.The smaller the wheel and tire, the faster it spins. The faster it spins, the more i...
