I'm concerned about the amount of sway we have with our trailer. I feel that it gets too unstable when semi's and even SUVs pass us. Admittedly, my past towing experiences were with an F250 diesel towing a 2500# horse trailer and THAT was very stable...
Hi! We've owned a 27' Prime Time Tracer for about 2 years now. We're in Florida. Last Summer we took it to Birmingham for a week in July. We found that the AC would shut down at night. No matter what we did, it would not turn back on. After we fli...
Greetings.We bought a used Jayco 22fb a couple of years ago. It was pretty inexpensive and suited our needs well enough. We've used it a tremendous amount and that has allowed us to create a list of features we'd like to have in our next camper. We'v...
Hi.We are fairly new to campers. We purchased a nice gently used 2010 Jayco Jayflight 22fb a few months ago and are thoroughly enjoying it. Unfortunately our current truck is a little under powered. It is a 2008 Dodge Ram manual with the small V8 an...
aftermath wrote:Whoops.Try this.www.airforums.com/forums/f464/weight-ratios-69739/htmlGot it. Thanks.http://www.airforums.com/forums/f464/weight-ratios-69739.html
Thanks again all! I see that we do have a CAT scale at a truck stop within 30 minutes of the house. I agree that we need to optimize what we currently have before considering a replacement. Still, it is good to hear about those that you all find sup...
Thanks Everyone! We will make some measurements and hook it up next weekend. I need to read up on how to determine tongue weight. There's a scale at the local dump... not sure where else to find one. I did look at the proride hitches. If all els...
Catching up on this. We bought the pricey warranty with the camper, so we took it in. They replaced the unit...not problems since then. We'll see how it holds up!
allen8106 wrote:belairbrian wrote:Are you running the fan on low at night? if so the unit may be icing.I'm inclined to think this might be the issue. Make sure you run the fan on high speed. Low speed will not put enough air flow across the evap coil...
