I have a 2005 Holiday Rambler Endeavor. I have no turn signals on the 4 pin connector. The Signals work on the coach, but when I connect my toad or a test connector to the 4 pin i get nothing.I have the wiring diagrams for the rig but it does not sho...
dougranier you nailed it! Thanks. I found 2 fuses that were blown evidently one left one right and that corrected the problem. They ware located in a fuse panel labeled Monaco 2. I will check out my towed to see if I can determine what may cause the ...
Thanks again. I have been trying to find the power source(fuse)?For this Roadmaster chassis, Endeavor. None of the fuses,that I have found, are labeled as trailer or tow etc. I suppose I could pull every fuse one at a time looking for a bad one..I ha...
Thanks for the fast reply! I checked the ground, I cleaned a spot on the frame measured resistance from there to the bare pin on the connector and had 0 ohms. With a turn signal on I get no voltage or lights with a test light on any pins on the 4 pin...
