I have a 1999 Southwind 36Z that I am bringing back to life after several years on non-use. Many things did not work when I got it including the Hydraulic Leveling System. I discovered that a solenoid was missing from the Battery Control Center (BCC)...
Ok, So I checked the motor solenoid and it's seems to work properly. I disconnected the control voltage wire (blue) from the solenoid and turned the ignition to ACC. There was control voltage on the wire. I disconnected the wire harness from the cont...
NutHouse2016 wrote:Solenoid may be shorted closed due to corrosion. My 34v bounder did that and I replaced all solenoid, one at a time. Just my experience.Where are the solenoids/relays? Control panel?Edit: I see a solenoid next to the hydraulic mot...
MrWizard wrote:Sounds like a stuck/shorted relayIn this situation the words solenoid and relay both refer, to the pump power relayIs the relay part of the control panel?Edit: I see a solenoid next to the hydraulic motor. I guess I should start there?
