Test your compressor.A few different tests.Place a clamp on ampmeter on the blue wire running to the compressor. Watch the meter when somebody turns it on to see how many amps it is running at attempted start up.Remove the cover on the top of the com...
I would try to program the thermostat first.Turn the thermostat off.Hold down the up and down button together for about 5 seconds until words are on the screen.Go to zone 1.Mode through the different settings for the Zone.Switch to Zone 2 and mode th...
The reason Suburban Gas Valves fail is because a majority of them drip on the coils. The drip tray underneath the TP Valve is almost always bent downward away from the burner box causing them to drip onto the coil and eventually short out.The proper ...
You did not mention if you have a cable or an aluminum rod pull.If you have the threaded aluminum rod it is less common to have problems. Just remove and replace or clean the valve. Probably some tp stuck in the valve track.If you have the cable pull...
