Hoping someone here can help as we’re in the midst of our vacation. Dometic RM2652 fridge. Pilot lights instantly. Burns for 15 sec or so and shuts off. I downloaded the manual.I checked the burn tube (beautifully clean), flue, and orifice. I’ve gone...
I hear ya. So keeping the flame going I was able to get the thermocouple up to 33mV and the board still de-energizes the feed to the solenoid. So now I have this question on the replacement. The original Dometic board? The Dinosaur P-711 board? Now i...
So as I’m looking at it, there are 2 yellow wires (+) on the solenoid. One from P3 and the other to igniter. What part controls the power? One of the relays? If I were to supply power to the yellow wire, would it stay running?
Thanks for the input. Still not working. Cleaned grounds and checked resistance. DFord it sounds like you have a different manual as this isn’t a 3 try setup. One try and done. I have power to igniter and solenoid. Flame sense circuit only gets up to...
https://www.dropbox.com/s/7ic6u3juc1n9bye/rvfridge.jpg?dl=0See if that link works with copy and paste. That’s my burner. I cleaned the orifice lightly with a toothbrush and jewelry cleaner. Just what she had on hand.
Thanks. It’s in a 2005 SpringdaleI linked a pic of the burner if it works. I tried both of my tanks to see if there is any change. No difference. I also tried sticking the old thermocouple is the flame of my water heater with my meter on it and got t...
