generac xg8000e low voltage/ engine wont rev up with load to increase volts to match load .need some help trouble shooting the thing i used a muilt meter to test HZ and volts got 55HZ 98 voltswent under gas tank turned a screw got 62Hz and 126volts n...
My truck is a crew cab long bed with a tool box fuel tank in the bed of the truck. Im looking at in bed camper ideas ?the tool box is level with top of bed would still like to be able to open to refuel while camper is in bed has any one done this ? ...
Im in the marines stuck in san diego right with a really messed up and back and hip but looking to out fit my trailer with a MSH4024RE inverter. where the best place to order from ?i wanted to do 48 volts but cause of my money thinking 24 volts ?
one is 225 amp hrs other is 370 amp hrs. well it looks like i can only pull(t105) 10 amps per hour and(l16) 18 amps a hr for 20 hrs its sound like it wouldn't last long powering a camping ? but i feel like this is way more then enough batteries with...
Thank you very much i reset the governor just to be sure. not sure if it was offThen i tighten up a spring and it seems to be working great now. idle 61.5 HZ 119 volts flood light load 60.68 HZ 121volts light and 15 amp air compressor 60.68 hz and 12...
I'm a tig welder so I can make nice brackets just a little unsure of the wiring but thinking I'm going to try doing this mods . I see there a few different power control modules but is one a lot better then other ?
Ok thank you it check that out when I get home I'm wonder would it be worth it to try taking that out and hooking up a power control one to keep it at 60h and 120 Volts like a Power control module with a 12 V electronic actuator to control the engin...
