While sanitizing my fresh water system and running water through the cold and hot supply lines, we had the lights on and when I opened the hot water faucets, the lights flickered and the water pump was much loader. When running the cold water lines t...
If this has been asked before I couldn't find it. We bought a new TT from a dealer a little over a year ago. Unfortunately due to the deaths of my son and wife, we never got to use it until about a month ago. Unfortunately, it appears that the dealer...
We have a 2013 Somerset E2 "Off-road" PUP. We were on our way to the dealer for lift repair when a minor dip in the road surface caused the trailer to start swaying wildly. I immediately applied the electric brake controller brake (not the TV brakes...
We have a 2013 Somerset E3 pup that frankly has had problems from day one with the electric lift not working proper. At first it wouldn't lift at all with the 12V battery (went back to dealer 3X, each time a new battery was installed and seemed to w...
Thank you everyone. I was able to remove the foul smell with the bleach and using about 1/3 cup per 15 gal. I almost forgot the outside shower but caught it after draining the bleach water out and refilling with fresh water tank. The water coming out...
So if they don't apply how do you determine the numbers with a WDH ?? We are right in the middle of looking at new HTT's and this info is critical to our decision.
We're considering moving from popup to Hybrid with 2017 Taco (V6 double cab with tow pkg-including coolers) as tow vehicle. Glad to hear it should handle a hybrid well. Still a bit concerned of the wind drag against the front of the trailer with n...
I measured the 4 corners and none of them where the same. So instead of trying to adjust all the cables myself, I took it back to the dealer (turns out we have an extended warranty on the whole camper; glad we bought that). They replaced a pulley wh...
Quick question, someone who used to be a suspension mechanic was looking at our suspension the other day and said it looked like our axle was bent. If so, it came that way from the manufacturer. I out a straight edge against it when I got home and ...
