Hi, I have a trailer with EPDM rubber roof. I was wondering if I can use eternabond or if I'd have to do something else. I have no idea if that's the EPDM itself or just mold which google seems to heavily imply that is most cases. Also I'm confused, ...
The model is a dometic 13500 BTU brisk 2, weighs about 70~80 lbs & I was wondering what is the minimum type of ladder I need. A average sized women would be on it & I would be pulling from the top. Can I use a multipurpose/multiposition ladder? I was...
My water heater switch keeps getting burnt every say 4-6 months & it seems like it's not the switch itself, but also the cables that get hot. I had to wrap up both with electrical tape because it had missing insulation & both get hot as well as the s...
I just changed the filter outside. Did as instructed; letting it run 5 minutes for the air & excess carbon to come out. Now only water comes out of the hot side, the cold side is very low water pressure. The whole entire trailer is like this now. Kit...
rhagfo wrote:Well I would never use bleach or other harsh detergent on the roof. We put Heng's rubber roof coating on our last year and doing well so far. If you want to try it they suggest using powdered Tide laundry detergent. I mixed up a strong b...
Thanks for all of the replies! I actually finished the job and learned a few things. So mounting bolts sometimes get seized in the thread of the nutcerts so turning the head of the bolt also would turn the nutcerts. I'd recommend anyone reading this ...
campigloo wrote:I know you’ll find this hard to believe because I did too. I had a similar problem. Hot water flowed but not cold. I took the toilet supply apart and there was white plastic grains that looked like coarse sand; same stuff in the kitch...
IB853347201 wrote:When you remove the filter does the water pressure return to normal on the hot and roadside?problem is not connection outside. I ran w/o filter.Old-Biscuit wrote:Hot water heater is FED from COLD water Line.........Is Water Heater B...
