Short version: I just replaced a failed AC fan motor. Now the fan actually works BUT it runs at around 20% of the previous speed and blows air very weekly. Also, when I set the fan to auto instead of low or hi, it doesn't blow at all. Help! Backgroun...
Hey guys,I'm a newbie to the 5th wheeling world and excited to (hopefully) get into it. I've got an 02 F-350 long bed that was previously used as a work truck for a roofing company and it has pretty extensive denting in the bottom sheet metal of the ...
Well gents. I got the new new motor installed today. The battlestation is now fully operational. Lesson learned: Be as careful and have as much attention to detail with parts as you are with the actual work and don't blindly trust the "pros" at an RV...
The parts shop that gave me the wrong motor ordered me the correct one and is going to exchange it with the one they gave me. With the shipping time and my schedule, I won't be able to install it until the week after the 4th of July. Once I get it in...
I pulled the cover off to check the wiring and take another look at the motor. The sticker on top which lists the specs of the motor indicates the direction of rotation. The new motor is spinning the direction it's made to spin, but that is the wrong...
Thanks for all the advice so far despite my sporadic updates. The cost is at the storage lot across town so I can only work a little bit at a time before work. This morning I was able to see the direction of rotation and it looks like the squirrel ca...
Thanks Doug. I'm gonna try and take a hot 120 and jump it to the hi setting tommorow morning. I'm guess it's possible that I messed up the control board while I was swapping the motor but I turned off the breaker and was careful with the wiring and t...
