My rig has a hardwired 50 amp cord that is way too long. So I am shortening it by cutting it and adding a new CAMCO plug like this:This oneThe instructions say not to solder the ends but it seems tough to keep the 6AWG stranded copper wire neat insid...
Yes folks, here we witnessed a brand new 5th wheel trailer that couldn't get from the factory to the dealer without a tire blowout....so sad. No it's not ours, I just witnessed this while on the road ourselves......I had to do a detailed write up. He...
Our recent RV Graphics Removal project is done. The vinyl graphics on our rig was faded, cracked and peeling, so it was time for action. Now, we have a simple, clean and waxed white fiberglass look that matches our truck.We made a video that document...
Our recent RV Graphics Removal project is done. The vinyl graphics on our rig was faded, cracked and peeling, so it was time for action. Now, we have a simple, clean and waxed white fiberglass look that matches our truck.We made a video that document...
Hey Gang,Our 18' A&E manual awning is staring to sag in the middle and I want to install a Center Awning Support. There are 2 choices and I am looking for opinions on which is better:1.Carefree of Colorado Awning Support-or-2.A&E Systems 930061 Top C...
And in my case, its not best to have too much....my rig has a poor design where the all the non-detachable cable has to be plugged in (to get power from the genny when off grid). Coiling up all that cable is a hassle especially when cold. Poor bend r...
I will say to you skeptics, that YES, I should of got a good shot of the bad tire.That said, you can also say my perspective on the RV industry is biased based on my experience owning 2 trailers, both of which required wheel and tire upgrades just to...
