from Eric Smidt by emailOwner and FounderHarbor Freight ToolsToday, I feel even worse. I'm disappointed and embarrassed because we've identified a welding defect in a small number of the Pittsburgh 3 ton steel jack stands (SKU 56373) that replaced th...
consider 6A Isc panels with 10g wireparallel 3, 1.56 x 6A x 2 = 19Aparallel 4, 1.56 x 6A x 3 = 28Awith lower amp panels, one does not need to fuse until 10g rating is exceeded by the number of paralleled less one?
Camco has a valve replacement that gets rid of the regulator, certainly not universalhttps://www.camco.net/lp-gas-accessories-3/low-pressure-valve-kit-3-8-sae-x-12-000-btu-quick-connect-58269
Qwazert wrote:I don't believe I have any way of forcing this controller into BULK mode...it does that part automatically.And I don't have any little lights...just an LCD readout.Which exact Voyager do you have? Is it the waterproof one or ?
the little lights on the controller indicate when the controller is in BULK mode.Bulk mode is the only mode where the panels full power goes to the battery. The panels should operate at approx battery voltage during BULK mode. As the battery voltage ...
