I have a 2019 Norcold NA8LX that after 12-24 hours cools great on gas, freezer and refrigerator. On electric power, after24 hours the freezer works great but the refrigerator will only get down to about 65F. Whats's going on?
We're starting to plan our next trip from south Texas to The Ark in northern Kentucky. We're NOT making reservations ahead of time for stops along our route so we can be free of time and distance commitments. What's your favorite RV travel app? Why?
Hey! Have any of you had problems with the trip planner? I put in my first destination and it gives me a travel time by RV that appears to be accurate then I add my ultimate destination much further east without making any other changes and the first...
Hey guys! We just bought an immaculate 2011 Dutchmen Denali 262rb. Anybody else out there got one? Can't wait to put my ProPride hitch on it and take off.
I'm having a problem with my 2003 Wedgewood Vision oven. The pilot lights fine and when I turn the temp up to bake, the burner lights and heats the oven. Apparently when the oven reaches temp and cuts the burner back, the whole thing shuts down. Make...
DougI tried wiring the new heating element directly to 120v for 24 hrs. Temps were from 78-95 that day outside. After 24 hrs the freezer was 2 degress and the fridge was 48. The expense was mobile tech fee to my house $145 and 1 hour labor to diagnos...
Thanks Doug. I get it. I have also had a probe in the freezer at the same time I had a probe in the fridge. It shows the temp to be 0-3 degrees. How would I check to see that the AC heating element is seated properly?I had a "technician" change it at...
DougNo offense intended. Perhaps I should have said "method" instead of "trick". I'll definitely use this method in the future and thanks for your input. I have a control board ordered and I'll get that cup of water ready. Thanks again.
OK let me try to answer all your questions. I have 123 volts to the control board. I have changed the heating element. I wired it direct for 24 hours bypassing the control board and using a probe thermometer with one probe in the freezer and one in t...
