I installed the Carchet tpms system with 6 sensors. I entered all the pressure and temperature data. It wants to go to the 4 sensor settings. The 6 sensor settings are in the system. How do I stop it from continuing onto the 4 sensor settings?
The one I bought from Amazon has 6 sensors. It also has a repeater if needed although they state the repeater is not needed for a typical rv. I did not use the repeater - our camper is 24+ feet. I am not pushing this tpms system - there are others more or less expensive. However it meets my needs and I was able to install it by myself.
"The sensor monitors tire temperature (Celsius) and pressure (0~116psi). Sensor signal covers 26 ft, SUITS MOST CARS BUT NOT FOR RV, TRAILER, TRUCK, MOTORHOME etc. WITH LONGER BODY."
OK, everything is working. This item is sold through Amazon and all service requests have to be sent to the "online seller" through Amazon.
There are a few reasons why I found this system to be the one I wanted. 1) The controller is small and fits on the dash just fine. I don't want to look at the display all the time anyway - there are warning signals that will tell me if something is wrong. 2) It has a small solar panel on top of the controller which keeps it charged so there is no need to be plugged into the vehicle. 3) Service request are handled very quickly - I initially was contacting Carchet rather than the actual seller. After I fixed that I got answers within 24 hours.
There are some things I learned that I will share with anyone that is interested via a message.