Showing results for 
Search instead for 
Did you mean: 

Mattress Ventilation Underlay

Explorer II
Explorer II

Recently discovered an underlay to provide ventilation under my mattress might be necessary to prevent mold. I will be living in my camper full-time through the seasons.


Curious on thoughts and if anyone has tips for a cheaper option or DIY other than the $120 products on amazon?


Nomad III
Nomad III

Just pick up a section of lattice from a home improvement store and cut to size. Just make sure, it's two layers (some plasitc versions are single layer). You want two layers so air can get past each section.

Tammy & Mike
Ford F250 V10
2021 Gray Wolf
Gemini Catamaran 34'
Full Time spliting time between boat and RV


there are several expensive products made for it. THIS  is what I am going to try myself.  All the DIY options I found were skeptical at best and most would probably colapse after a ton of use.  

2014 F350 6.7 Platinum
2016 Cougar 330RBK
1991 Slumberqueen WS100

Navigator II
Navigator II

What about some peg board and cheap 1x2 pine from Home Depot. Two sheets of 4x8 pegboard and 6 strips of pine would be just under $60

Peg Board 


2001 Suburban 4x4. 6.0L, 4.10 3/4 ton **** 2005 Jayco Jay Flight 27BH **** 1986 Coleman Columbia Popup