โMay-30-2015 03:13 PM
โJun-06-2015 03:28 AM
โJun-05-2015 11:51 PM
Ron Nielson wrote:boatscr wrote:
I would like to dull the shiny part to blend in with the rest of the cap. Can anyone with experience recommend the right grit compound to do this job?
Use 1000 grit wet or dry and use with sanding block, and water (3 gals) with a little (1 tsp) liquid detergent in it. Back and forth in one direction, then back and forth at 90* to original strokes. Don't use much pressure.
โJun-05-2015 10:22 PM
boatscr wrote:
I would like to dull the shiny part to blend in with the rest of the cap. Can anyone with experience recommend the right grit compound to do this job?
โMay-30-2015 06:13 PM
โMay-30-2015 05:49 PM
boatscr wrote:Strange expression.. does that mean it's closer to 10?
My unit is 9years going on 10years old
โMay-30-2015 04:02 PM
โMay-30-2015 03:52 PM
โMay-30-2015 03:19 PM