Equa Flex alignment

[Shoe2728]

Found my Equa-Flex was cracked when I was doing wet bolt update.. The reason being because the springs were not aligned with the Equa-Flex cause undue stress. The Pic shows that it doesnt line up, its actually off by more than what the picture shows. Was wondering what others thought about it I could loosen the four bolts on the axles holding the springs and maybe just get enough play to move the ends of the springs over to align with the equa-flex, both sides are off the same.

[Charlie_D_]

Do yourself a favor and scrap that Trailair and get an E Z Flex. There is a current post on here about a Trail Air ripped apart. Not the first post I have seen on this forum of their failure.

I wouldn't think that it would be an issue for you to loosen slightly and move over. Current and previous rig had locating pins on top of spring that allowed some movement.