Dec-27-2013 08:26 PM
Dec-29-2013 09:42 AM
Dec-28-2013 04:56 PM
fujiapple wrote:
Thanks for the feedback. If you look at the photos in the ad I linked to in my first post, you will see that our RV does not have a standard type of built-in dinette with bench seats. It has instead a free-standing rectangular table with 2 chairs. I am looking to replace the table with the folding wood table, and also swap out the chairs.
Dec-28-2013 07:47 AM
jnharley wrote:
Make sure that you have your VIN number available. They can look up just about anything with that, NuWa is not producing RVs right now but their service and parts department are open and busy. They are also selling other brands of RVs (DRV and Lifestyle among others) as the Kansas RV Center.
Dec-28-2013 07:45 AM
Deb and Ed M wrote:
My "standard" dinette table is 23" x 43".
Your 42" round table won't work unless you're tearing out the entire dinette, and even then, it will be really TIGHT. If you figure each chair requires an additional 24"; then you need a space approx 7'6" square.
If you're keeping the dinette seats, then with the leaf folded down, there's no place for knees on that side of the table.
Dec-28-2013 07:02 AM
Dec-28-2013 07:02 AM
Dec-28-2013 01:02 AM
Dec-27-2013 08:49 PM
Dec-27-2013 08:48 PM
Dec-27-2013 08:39 PM