Residential bidet

[buc1980]

I got a foot operator china toilet anybody install a residential bidet seat in one.I am worry that the water system in a RV is different from the one in the house.It can be done? Finely I figure out how to post picture.

[kohai]

I have a rigged thing but I'm unhappy with it. I couldn't fit a dometic 310 to do it right.

[buc1980]

Here is some picture of the project.

[Bierp]

Not at all. Got it done, works great!

Not as nice a unit as yours, but it does the job. 🙂

[buc1980]

Bierp wrote:

buc1980 wrote:
Hello,I see that you start the improvement on the new FW

Yeah, but I didn't get home till 11pm. Seemed like a bad time to start a toilet replacement. Hopefully tomorrow. 🙂

Have fun, I don't think is a difficult job.

[Bierp]

buc1980 wrote:
Hello,I see that you start the improvement on the new FW

Yeah, but I didn't get home till 11pm. Seemed like a bad time to start a toilet replacement. Hopefully tomorrow. 🙂

[buc1980]

Bierp wrote:

Bigg Al wrote:

So how are you coping with the shot of cold water??

The first use is a bit unsettling. By the third use you wonder how you ever got by without it.

The cold water just isn't a factor.

I'm bummed to find that my new Montana came with a crappy (HA!) Thetford toilet and it doesn't want to play nicely. My Dometic 310 arrives tomorrow. 🙂

Hello,I see that you start the improvement on the new FW

[Bierp]

Bigg Al wrote:

So how are you coping with the shot of cold water??

The first use is a bit unsettling. By the third use you wonder how you ever got by without it.

The cold water just isn't a factor.

I'm bummed to find that my new Montana came with a crappy (HA!) Thetford toilet and it doesn't want to play nicely. My Dometic 310 arrives tomorrow. 🙂

[Sea_Six]

Great info here. Thanks for the posts.

[redhooker]

Well pic or not the short answer is if the holes will line up with the bidet's adjustable plate yes it can be done. Just try the one Brondell at Lowes and if it does not fit take it back no issues. If it does indeed bolt on then get a 1/2 inch to 3/8 inch threaded T valve and get er done in 10 minutes.

https://www.lowes.com/pd/Brondell-White-Bidet-Attachment/1000331497

https://www.lowes.com/pd/SharkBite-1-2-in-Push-to-Connect-x-1-2-in-Push-to-Connect-x-3-8-in-dia-Reducing-Tee-Push-Fitting/1000182485

[buc1980]

I wish I can post the picture from my phone but they make it so difficult.

[redhooker]

I have installed several in RVs. Piece of cake if you have a toilet with standard style seat bolts (domestic 310 or other similar). Most toilets are plumbed with pex pipe 1/2 inch so a simple sharkbite T with a valve and 3/8 male is all you need. The bidet at Lowe’s has a standard 3/8 water line and screws right on. Other brands (bio bidet comes to mind) have proprietary threads that must screw onto one of their Ts and can be a little more involved. The supplied T is for 7/8 thread for the cold water tank connection at your S&B, but you can usually request a HOT water T and it will be standard 3/8 thread and you can splice it in with a male and female 3/8 thread to 1/2 inch pex sharkbite.

Anyone that thinks a bidet in an RV is a bad idea has never tried one. Uses very little water and you use as little as 2 or 3 squares of TP per use. These things are awesome for your black tank.

[buc1980]

The RV market start to install them on expensive motor home.Soon will be an option on all RV.

[Chiefcpo]

We got ours from bluebidet.com easy to install and shot of cold water just settles you down.

[buc1980]

The bidet got a water tank which is heat all the time so cold water don't hit you.That a japan design for a long time.