โDec-12-2015 12:42 PM
โDec-12-2015 04:26 PM
b727capt wrote:
I too am interested in this combo. Looking at ordering a new Weekend Warrior and they may put 17.5's on at the factory. GRWR is 21k with standard 8k axles. I also am considering upgrading to hydraulic brakes. What 17.5 tires are the best?
โDec-12-2015 04:26 PM
Cummins12V98 wrote:Jimf1234 wrote:
The other issue is that I'm sure my wheels are only 80psi so it doesn't do much good to run g's at 80psi.
85psi is the minimum for the GY "G" tire. If your rig came with E's 85 is most likely the proper pressure for your rig. I went from GY "E" to GY "G" on my Avion with 80psi rims and ran 85psi with the G tires and had perfect wear with thousands of miles.
โDec-12-2015 04:22 PM
Jimf1234 wrote:
The other issue is that I'm sure my wheels are only 80psi so it doesn't do much good to run g's at 80psi.
โDec-12-2015 04:22 PM
Lantley wrote:Old-Biscuit wrote:Jimf1234 wrote:
The other issue is that I'm sure my wheels are only 80psi so it doesn't do much good to run g's at 80psi.
But do you need 4800# capacity per tire at `125# ?
That's 19,200# of capacity.....
6K axles-------Approx. 11,500# or less weight on axles
I agree 17.5 wheels appear to be over kill.
I have 16", G rated,110 PSI Sailun's on my OEM rims
โDec-12-2015 01:41 PM
Old-Biscuit wrote:Jimf1234 wrote:
The other issue is that I'm sure my wheels are only 80psi so it doesn't do much good to run g's at 80psi.
But do you need 4800# capacity per tire at `125# ?
That's 19,200# of capacity.....
6K axles-------Approx. 11,500# or less weight on axles
โDec-12-2015 01:39 PM
โDec-12-2015 01:37 PM
Jimf1234 wrote:
The other issue is that I'm sure my wheels are only 80psi so it doesn't do much good to run g's at 80psi.
โDec-12-2015 01:16 PM
โDec-12-2015 01:09 PM
โDec-12-2015 12:54 PM
โDec-12-2015 12:52 PM
โDec-12-2015 12:52 PM