Then, lets cut a bunch of tapered strips of thin wood on top of the plywood, like this.
Well, that's a little strange.
Well, that's a little strange.
Sorry for the delay. I thought I was going to be able to get this posted last night, but, I didn't get far enough.
First off, let's take a piece of plywood and put a bunch of pencil lines on it, like this.
First off, let's take a piece of plywood and put a bunch of pencil lines on it, like this.
Here is a mini update for those of us who are going into withdrawl, including myself. Lol.
This is what the inside of the sink is starting to look like. This has 3 strips of Oak on top, followed by a strip of Black Walnut, then one of Mahogany, followed by the Oak below that.
This will be sanded a little smoother, then covered by fiberglass cloth, with Epoxy covering it. From what I am told, after a few coats of Epoxy, the cloth is no longer visible, and all that is seen is the wood, with the extra strength, of course.
Evidently this is how it looks with wood. Here they are building a wooden strip canoe.
Some of you have more knowledge of this than I do, but this is what I am shooting for.
This is what the inside of the sink is starting to look like. This has 3 strips of Oak on top, followed by a strip of Black Walnut, then one of Mahogany, followed by the Oak below that.
This will be sanded a little smoother, then covered by fiberglass cloth, with Epoxy covering it. From what I am told, after a few coats of Epoxy, the cloth is no longer visible, and all that is seen is the wood, with the extra strength, of course.
Evidently this is how it looks with wood. Here they are building a wooden strip canoe.
Some of you have more knowledge of this than I do, but this is what I am shooting for.
Last night I was sitting in the motorhome on my mechanics roll around seat, and made a discovery.
I was sitting between the counters, and I pulled out one of the drawers. I thought, hmmmm, maybe I could lay a piece of plywood on top of the drawer, and, low and behold, I just created a nice little table.
No one could walk past me while I was sitting there, but, it created some extra space for putting something there.
When I got up, then it was easy to walk between the counters to get to the bath area.
So I pulled out 3 drawers, and covered them with wood, and stood back and looked at the "new" creation.
Obviously, this would be very temporary, but provide a surface either about 12 inches wide, and 6 feet long, or 18 inches wide.
Either way, with no one standing there, access to the bath area is easy.
That leads me to tonight's $65,000.00 question.
What could this configuration be used for?
Throw out your best ideas!
I was sitting between the counters, and I pulled out one of the drawers. I thought, hmmmm, maybe I could lay a piece of plywood on top of the drawer, and, low and behold, I just created a nice little table.
No one could walk past me while I was sitting there, but, it created some extra space for putting something there.
When I got up, then it was easy to walk between the counters to get to the bath area.
So I pulled out 3 drawers, and covered them with wood, and stood back and looked at the "new" creation.
Obviously, this would be very temporary, but provide a surface either about 12 inches wide, and 6 feet long, or 18 inches wide.
Either way, with no one standing there, access to the bath area is easy.
That leads me to tonight's $65,000.00 question.
What could this configuration be used for?
Throw out your best ideas!
