May-21-2015 07:28 AM
May-22-2015 07:50 AM
May-22-2015 06:01 AM
cgmartine wrote:Good advise for when you can get the wires to the lights. Unfortunately those high mounted lights are generally very difficult to re-wire. Hopefully the trouble can be found below.
The most simple and easiest way to check it is to run a temporary ground wire from the nearest grounded point to the ground point on the inoperative light. If it works, then you automatically know it is a ground issue. The solution in that case is to run a whole new ground wire. If providing a solid ground wire does not fix the problem, then you have no dc power, and will need to supply it, preferably from a good known source.
May-21-2015 10:13 PM
May-21-2015 07:52 AM
May-21-2015 07:49 AM
May-21-2015 07:49 AM
May-21-2015 07:46 AM