โFeb-22-2015 11:21 PM
โMar-21-2015 08:28 AM
Let's Travel wrote:
The class A group probably has more experience with this, since the Resi-refers are just now coming to the trailer industry. I am wondering if there are any consistent problems with having this type of refrigerator running on a pure sine invert er in the RV? Does the movement of the RV while the refer is running (going down the highway) cause shortened life of the appliance? It seems the Fivers could have more of an issue with that than the air ride class A type. I have never been a fan of the 12V RV fridge and would love to have the Resi type. So....what are your experiences? Should I opt for the big beautiful Samsung residential fridge in a new Fiver? Would appreciate your knowledge. Thanks!
โMar-21-2015 08:22 AM
โMar-21-2015 08:02 AM
โMar-19-2015 08:10 PM
eheading wrote:
You guys all have me confused. If I accept your claim that your residential refrigerator averages about 1 amp. That is at 120 volts. Roughly, that means that at 12 volts, you will be drawing about 10 amps. That is the power consumption that is important if you are dry camped. I'm not sure what the Norcold draws of 12 volts when running on propane, but there is no doubt in my mind it is WAY less than 10 amps.
Ed Headington
โMar-19-2015 06:55 PM
Viewfinder wrote:
I think we're having 'fish' for lunch.
jim
โMar-19-2015 06:33 PM
โMar-19-2015 02:33 PM
โMar-19-2015 05:35 AM
bigdisplay wrote:John & Angela wrote:bigdisplay wrote:. Well, I don't know enough about the thermal thingy to draw any conclusions but when we swapped out our norcold 1200 for our residential there was LOTS of charred wood and heat shield behind the unit. Just sayin.....
people must have the thermo shut down system installed and also be aware if your Norcold fridge quits cooling don't keep trying to run it
obviously "IF" the picture showing the fire is caused by a Norcold it was because he never had the shut off device installed and kept running the fridge even though it was not cooling
if you had charred(burnt black wood) then two/three things come to mind.The fridge heat (chimney) flue insulation was inadequately installed .That pipe gets several hundred degrees(hot)
Also maybe It was not cooling properly and you keep turning up the stat and letting it run hoping it would somehow start cooling
it may have possibly had blockage
โMar-18-2015 04:59 PM
bigdisplay wrote:. Well, I don't know enough about the thermal thingy to draw any conclusions but when we swapped out our norcold 1200 for our residential there was LOTS of charred wood and heat shield behind the unit. Just sayin.....
people must have the thermo shut down system installed and also be aware if your Norcold fridge quits cooling don't keep trying to run it
obviously "IF" the picture showing the fire is caused by a Norcold it was because he never had the shut off device installed and kept running the fridge even though it was not cooling
โMar-18-2015 11:58 AM
โMar-18-2015 10:13 AM
โMar-03-2015 06:53 PM
larry cad wrote:RayChez wrote:
John, thank you for a very intelligent answer. I never knew what would happen to the motor if we were away and the voltage would drop down to where the motor on the fridge would start dragging. Did not know if the brushes to the armature would cause damage to the motor itself.
The reason why I asked the question was because my Norcold 1200 LRIM is twelve years old and it could blow up.
And it had crossed my mind that maybe a residential refrigerator would be in line to replace that Norcold. Most of our camping is with full hookups. But it is good to know what could happen if dry camping was in store.
Now Don got a little defensive right away and my post was not to discredit anybodies refrigerator. It was a question for my own and others that are interested on maybe going residential.
Thanks John greatly appreciated.
Ray, what was said about inverters is correct, the inverter is designed to shut down if the battery voltage drops below a level that would prohibit the inverter from producing a satisfactory voltage output.
Refrigerator compressors do NOT have brushes or armatures. The motors used in compressors are induction motors and they are brushless.
โMar-03-2015 05:06 PM
RayChez wrote:
John, thank you for a very intelligent answer. I never knew what would happen to the motor if we were away and the voltage would drop down to where the motor on the fridge would start dragging. Did not know if the brushes to the armature would cause damage to the motor itself.
The reason why I asked the question was because my Norcold 1200 LRIM is twelve years old and it could blow up.
And it had crossed my mind that maybe a residential refrigerator would be in line to replace that Norcold. Most of our camping is with full hookups. But it is good to know what could happen if dry camping was in store.
Now Don got a little defensive right away and my post was not to discredit anybodies refrigerator. It was a question for my own and others that are interested on maybe going residential.
Thanks John greatly appreciated.
โMar-03-2015 05:00 PM