cancel
Showing results for 
Search instead for 
Did you mean: 

shower wall

JOERVDREAM
Explorer
Explorer
The shower wall is all one piece covering the 3 walls made of a flexible plastic in the 04 Winnebago sightseer I just purchased. All along the top is no longer attached to the wall. I ran my fingers along the inside/back of it and it feels like maybe there's double sided tape that just gave up? If that's the case any ideas on best way to repair that?
8 REPLIES 8

Tom_Cooper
Explorer
Explorer
Great thing. I'm fine with the shower, but I ordered a pair just in case

JOERVDREAM
Explorer
Explorer
Thanks the washer idea sounds good. What I like about this forum is the reply’s get me to think outside the box. Thanks

Bert_Ackerman
Explorer
Explorer
dougrainer wrote:
This is what the RV industry uses in white/off white/beige. These are what I use also. Doug

https://www.amazon.com/Hillman-Group-58552-Nylon-8-Pack/dp/B00NUFQ0QU/ref=zg_bs_6909189011_9/146-126...


That is what we call a Panolam rivet. Can be had off the shelf at the Big Box usually.

MountainAir05
Explorer II
Explorer II
dougrainer wrote:
This is what the RV industry uses in white/off white/beige. These are what I use also. Doug

https://www.amazon.com/Hillman-Group-58552-Nylon-8-Pack/dp/B00NUFQ0QU/ref=zg_bs_6909189011_9/146-126...


Way better than what I suggested.

dougrainer
Nomad
Nomad
This is what the RV industry uses in white/off white/beige. These are what I use also. Doug

https://www.amazon.com/Hillman-Group-58552-Nylon-8-Pack/dp/B00NUFQ0QU/ref=zg_bs_6909189011_9/146-126...

Bert_Ackerman
Explorer
Explorer
Panolam rivets.....

Lwiddis
Explorer II
Explorer II
I’m for Mountain’s fender washer idea.
Winnebago 2101DS TT & 2022 Chevy Silverado 1500 LTZ Z71, WindyNation 300 watt solar-Lossigy 200 AH Lithium battery. Prefer boondocking, USFS, COE, BLM, NPS, TVA, state camps. Bicyclist. 14 yr. Army -11B40 then 11A - (MOS 1542 & 1560) IOBC & IOAC grad

MountainAir05
Explorer II
Explorer II
you can try to seal it back using silicone sealant if you have enough space to put it in. if so put in a small amount and push to wall then pull back , wait a 30 seconds or so and push it back and hold. Do this in as many spots as you can. If not get you some fender washer stainless steel with stainless or brass screws and use them around the top. Ensure you seal each hole with sealant as you go.