Windshield wiper blades

[racer99]

2000 Fleetwood Flair/30'/F-53 chassis/V-10 engine
I have wiper blades that are held on with two little screws and are 25 inches long and can not find replacement blades -Anybody got any ideas
Thanks Rich

[bigred1cav]

Go to or call and order adapters from O'Rielly's I did and I can now use easy to locate blades.

If this isn't the part number it is close.

ANC-48-17



http://www.summitracing.com/parts/anc-48-17?seid=srese1&gclid=CKHP_dSA3LwCFVBk7AodU3kAEw

[cjalphonso]

I find the easiest way is to buy the whole blade from WW then remove the rubber and install into the existing blade holder then throw away the brand new blade holder. Seems very wastefull, but it beats drilling out rivets etc.

[falconbrother]

I have the expensive semi-truck blades. I have owned them for several years. When I'm not using the RV I let the wipers (blades) sit down in a swimming pool noodle I modified. It keeps the sun off of them and they will last for years this way. I buy a new noodle each year at the dollar store. I cut it in half and split it down the middle. When we're not on the road I just slide those things onto the blades.

[Clay_L]

FWIW - for ten years when my motor was parked for more than a couple of days, I have kept my blades covered with a piece of the pipe foam insulation with a slit down the side. I also have a tennis ball under each arm to keep the blades from touching the windshield and taking a set.

The blades are still pliable and work fine after the ten years.

[Gjac]

Replacement blades are cheap if you stay under 30 in blades. Mine came with 24 in also. My first replacement was 26 in and the second was 28 in. I like the larger blade better. Both were $5.00 or less per blade.

[jerseyjim]

Leaving on a trip the next day...and THAT is how I find out my wipers wouldn't wipe clean.
Bit the bullet..left for our Florida trip, but on the way...(40 miles in a straight line)drove right to my local CW store, they installed them (no $) and next stop was Florida.

Expensive, yes. But they got what you need most of the time. And that is what you pay for.

[chucl66]

NAPA, PN# 60-2656, bolt on.

Chuck

[gbopp]

I replaced the wipers on our 96 Southwind with 24" wipers I bought at WalMart.

They were about $7 each.

It was the longest wiper with the bolt hole.

I don't notice the slightly shorter wipers and, they work great.

[racer99]

THANKS all I found them-$32.oo but I head for FL in the morning and I can't be screwing around to much-ILL to Cave city ky RAIN RAIN !!!!!

[Clay_L]

Here are a couple of sites where you might be able to get the part numbers and dealer locations.
True Vision

Trico

[Daveinet]

Rain-X - haven't used my wipers in 80K miles.

[Dutch_12078]

NAPA's 24" replacement blades fit in my existing blade holders with only a minor mod involving spread the "ears" just sightly. I think the pair was about $6.

[RV_CONUS]

If there is a small screw/bolt with a nut that holds the blade,
I buy the longest wiper wally has, drill out the rivet and the wiper fits and works perfect.


Takes less than 5 minutes to change them out.

I don't buy $50 Rv blades.

Works fir me, others mileage may differ.