Good Sam Community

tfbowe · ‎Dec-29-2018

We replaced our 15 year old Brake Buddy when it finally died with a new Classic II model. Unfortunately the handle on the new one doesn’t contact the seat because the device itself hits the seat frame on one side first.

Our CRV is a 2010, a pretty common toad, so there must be other owners who have seen this issue. Anybody have any good ideas to solve it?

Thanks

Tom & Linda Bowe
Daisy the beagle

Former 7 year Full-timers, now home based in Blairsville, GA

Bill_Diana · ‎Jan-28-2019

Call Brake Buddy tech support. They are always most helpful.

Bill & Diana

Please click here to visit our Website

Gonzo42 · ‎Dec-30-2018

Try putting a piece of wood (like 1/4" plywood) between the seat and BB.

MOTHER SHIP Winnebago View 24H (2007 Dodge Sprinter 3500 Chassis, 2008 Body)3.0 L M-B Diesel V6 bought used with 24K miles. Toad: ROCKY the Flying Squirrel.

BarneyS · ‎Dec-29-2018

Moved to Dinghy Towing forum from Towing.

2004 Sunnybrook Titan 30FKS TT
Hensley "Arrow" 1400# hitch (Sold)
Not towing now.
Former tow vehicles were 2016 Ram 2500 CTD, 2002 Ford F250, 7.3 PSD, 1997 Ram 2500 5.9 gas engine

2oldman · ‎Dec-29-2018

Probably belongs in Dinghy towing.

"If I'm wearing long pants, I'm too far north" - 2oldman

Good Sam Community

Brake Buddy Classic II with Honda CRV