cancel
Showing results for 
Search instead for 
Did you mean: 

Bearing repack question

Deano_1
Explorer
Explorer
Hey guys,

I have a double axle 26 foot camper.


Today I removed cleaned and repacked the bearings (on side of my camper). I didn't put a ton of grease in and around everything, but I was careful make sure both bearings were properly coated. My question, once I put everything back together, how much grease should I pump into the fitting? I put quite a few pumps in, but didn't notice any grease coming out.

Thanks!

Deano
16 REPLIES 16

Cobra21
Explorer
Explorer
Filling the hub full is more of a boat trailer thing.

Turtle_n_Peeps
Explorer
Explorer
There is zero reason to do anything more if hand packed correctly. Is that what you did? If so, go on vacation.

You only need one molecule between metal to be protected. There is no need to fill the hub with grease.
~ Too many freaks & not enough circuses ~


"Life is not tried ~ it is merely survived ~ if you're standing
outside the fire"

"The best way to get a bad law repealed is to enforce it strictly."- Abraham Lincoln