โJun-19-2018 09:07 AM
โJun-23-2018 08:54 PM
โJun-22-2018 03:29 PM
โJun-22-2018 11:04 AM
fpoole wrote:CAJW wrote:
.... Buckstop with a 17,500 SuperWinch, .....
Ahhhrrrgghhh... (Tim Allen, Tool Time Grunt) 17,500??
heheh, I'll have to check it out... I was going with the Warn 16.5 and while I did see some Hydraulic Winches, they appeared to be a little pricey... and complicated for the bumper install..
Heheh, thanks CAJW, Gawd, now something else to upgrade to .... Joking..
thanks..
โJun-22-2018 08:36 AM
โJun-22-2018 08:24 AM
โJun-21-2018 09:46 PM
jefe 4x4 wrote:
Isn't the stock Dodge 2500 bumper considered a crumple zone? My son driving in the slow lane was Pitt maneuvered by a high flying drunk trying to pass on the shoulder of the freeway shoving him into the center divider at speed. Hit and run, but he didn't get far as the collision destroyed and completely immobilized his pickup. Matt's 2001 Jeep Grand Cherokee's front end was smashed all the way back to within an inch of the I-6 block. Everything forward of the block was accordioned flat. He suffered only a cracked tibula and some contusion but the guy's insurance paid off big time.
I had a Tomba Burro welded together for my old FJ-55 and there was nothing crumply about it, built exclusively for travel in Mexico where bovine like to sleep on the pavement after a hot day. In Canyonlands, 1978:
jefe
โJun-21-2018 09:38 PM
Kayteg1 wrote:
$5000 becouse it is Dodge ๐
I dig my old topic about replacing bumper on my F450, but the photobucket pictures are gone.
Still I spend $200 on used bumper that fixed my truck.
Looking at above damage - I lucked having taller truck, where deer went under, not touching the grille.
โJun-21-2018 04:49 PM
โJun-21-2018 07:42 AM
โJun-20-2018 11:28 PM
โJun-20-2018 08:31 PM
CAJW wrote:
.... Buckstop with a 17,500 SuperWinch, .....
โJun-20-2018 07:23 PM
fpoole wrote:
Yep, I'm looking at them too.. Buckstop Bumpers... with a winch, so curious to what gets posted... Same thing with headlights.
thanks..
โJun-20-2018 06:03 PM
โJun-20-2018 05:38 PM