Jayco air mattress help

[penguin747]

Got our 2013 Jayco jayflight 26 rls recently and long story short is the sofa air mattress is gone. The dimensions from my best measurement are 68×51. Priced through jayco it is well over the $200 range. Closer to 250 to be exact. Yes it does have pump installed also as do most. Could someone with same setup give me some solid measurement of the actual mattress. Maybe I can amazon it. Length is important because to long and I won't be able to go between counter and bed to get out door when kids asleep. Thanks for Amy help

[Hector_Bravo]

I stopped by my trailer but I could not get the slide open due to the way my trailer was tucked in. I did check the web site and in the archives I found the hide-a-bed listed at 54 X 74.

My wife said she uses double sheets on that mattress.

Hope that helps.

[Scottiemom]

So, did you get any help from Malinda?

Dale

[penguin747]

Hector Bravo wrote:
Yes, it does hang past the frame. I can't get you actual dimensions until Tuesday afternoon.

Thanks for looking for me

[Hector_Bravo]

Yes, it does hang past the frame. I can't get you actual dimensions until Tuesday afternoon.

[penguin747]

Scottiemom wrote:
The best I can recommend is to call Malinda Reynolds at Mastercraft RV Furniture in Shipshewana. They use Airdream air beds in their sofa bed sleepers they supply to the RV industry. I know the mattresses are shorter than regulation. But if you explain what dimensions you need, she can tell you what can be used. She knows this stuff really well. Since yours is a Jayco it's quite possible your original mattress came from this factory just down the road. Deflated, the couple inches might not be a problem.

You can email her at malinda@mastercraftincorporated.com or call her at 888-522-5652.

Here is their website: Mastercraft and they have a FB page as well.

We just had our captain's chairs recovered by an employee there and they are beautiful and half the price of replacing new.

Dale

Thanks. I will call on Monday.

[Scottiemom]

The best I can recommend is to call Malinda Reynolds at Mastercraft RV Furniture in Shipshewana. They use Airdream air beds in their sofa bed sleepers they supply to the RV industry. I know the mattresses are shorter than regulation. But if you explain what dimensions you need, she can tell you what can be used. She knows this stuff really well. Since yours is a Jayco it's quite possible your original mattress came from this factory just down the road. Deflated, the couple inches might not be a problem.

You can email her at malinda@mastercraftincorporated.com or call her at 888-522-5652.

Here is their website: Mastercraft and they have a FB page as well.

We just had our captain's chairs recovered by an employee there and they are beautiful and half the price of replacing new.

Dale

[penguin747]

I'm needing someone with same setup to let me know if their air mattress hangs past the frame. Most lengths on amazon are beyond the "68. I have a little wiggle room on that though

[therink]

You can buy the same size mattress at Walmart (coleman) for about 40 and not have to replace it for a long time. I went through 2 OEM air mattress before I figured this out. The coleman is also 6" thick, more comfortable.

[newman_fulltime]

penguin747 wrote:

newman fulltimer wrote:
Amazon has a full that 74 by 53" for 129.99

No real wiggle room on that 51 due to the arms on sofa. Maybe the original fits snug. I'm just not sure being I don't have original to go by.

2" s when airing up I doubt you will notice I'm sure it will fit

[penguin747]

newman fulltimer wrote:
Amazon has a full that 74 by 53" for 129.99

No real wiggle room on that 51 due to the arms on sofa. Maybe the original fits snug. I'm just not sure being I don't have original to go by.

[newman_fulltime]

Amazon has a full that 74 by 53" for 129.99

[itguy08]

Our unit came with an AeroBed for the pull out couch mattress. Maybe they have something that will fit.