My Evergreen Everlite TT has a Lippert Power Awning. When it did not want to operate this last weekend, I discovered that it had a manual method of opening and closing, which I used to restore normal operation.However, I was unaware that this existed...
Does anyone have any experience with Firman Generators? I am specifically looking to buy one of these. I plan on using it to supply power to my 50-Amp TT until I can get the electric power run to the property that I own. Then I will use it as backup ...
Anyone installed JT Strong Arm Stabilizers on a trailer with an insulated belly? Our Evergreen Everlite is fully enclosed on the bottom, so there are no exposed frame members. Saw a Lippert video where they described getting a piece of angle iron and...
I have one of these NOCO 5 Watt Solar Battery maintainers. Assuming I have two 6 volt batteries in series to product 12 volts, am I correct that I would still use a 6 volt controller despite the fact the output from the batteries is 12 volts?Thinking...
Does anyone know of a Group 31 size battery box that does not have large handles and/or cable ways on the ends of the box?On the front of my TT I have just enough room to put 2 Group 31 sized batteries - but not 2 battery boxes due to the extra 'stuf...
The Honda EU7000is would not work as far as having sufficient power for my 50 amp trailer.And at 4-5X the price . . . . I have found one of these Firman's for less than $750 new - delivered!The other thing that appealed to us about this is the dual f...
Thanks for the suggestions. The suggestion to rotate the one box lid 180 degrees seems the most promising. I am going to get a pair of the boxes today and try it out. I don't own the batteries yet - they will be an upgrade to the single battery curre...
To answer the recent questions - I bought a Norcold 641.There was no code on the front. If you looked at the unit, you would think it was working just fine. Martin
If anyone in the Dallas area is interested, I now am the proud owner of a non-functioning Norcold refer. Sitting in the warehouse at my work. Would rather give it to someone who might have some use for it rather than just put it out and let a scrap c...
