Looking for some suggestions. Our folding couch / bed that that goes up against the wall, the bracket has pulled out from the wall. I tried running a little bigger screw in it but pulled out again. any ideas on a more permanent fix?
Over the weekend I ran the Generator for about 2 hours all of a sudden it just quiet like it ran out of fuel has 1/4 tank in it. Tried to restart over and over and started to get a strong gas smell (seems like the carb is flooded). I let it set over ...
Over the weekend I ran the Generator for about 2 hours all of a sudden it just quiet like it ran out of fuel. Tried to restart over and over and started to get a strong gas smell (seems like the carb is flooded). I let it set over night and still not...
I was trying to search for the those little things that divert the water away from your rig. You see them on all the corners and what not on your rigs.
I finally got around to fixing the couch, all went well. I used a good quality pine, seemed a bit harder than the white pine. Thanks for pointing me in the right direction.
We also hand a 2004 21' Rampage that the door did the exact same thing. I thought it was from pulling the Baja in and out. We ended up trading it in on another model sorry for your misfortune.
nayther wrote:Goldneye1 wrote:fitznj wrote:I had the same thing happen; Assuming the bed bracket has been screwed in to thewall, then you may want to look at the load on the brackets; You may find that when you sit on the couch there is a load on the...
fitznj wrote:I had the same thing happen; Assuming the bed bracket has been screwed in to thewall, then you may want to look at the load on the brackets; You may find that when you sit on the couch there is a load on the bracket trying to pull the sc...
