Good Sam Community

Upon further investigation, the condition is worse than I first saw.1.5 +/- amp draw from the G7 Module & interior fuse panel circuit0.8 amp draw from another circuit (starts at 0.3 and then goes up)1.8 amp from the inverter (starts at 3.0 and then g...

Measured a 1.6 amp draw when all items are off. The circuit includes the G7 control module and the interior fuse panel.Anybody have experience with this or the typical G7 draw?Thanks,John

Winnie (per Lichtsinn) says the lock/latch for rear compartment door is no longer available. It's a simple lock assembly that turns 90 degrees and has threads on the inner end for attaching the lever that holds the door shut. Anyone have a idea rega...

Generator started running rough and stalling under load.Cleaning and soaking carb in cleaner for a week helped but not enough.I tried two Chinese carbs off eBay ($36 and $47 if memory serves). Both ran very poorly if at all.Bit the bullet and bought ...

The Jensen av system and TV have been a nightmare since new, and I'm tired of rewarding Jensen by buying replacements for their pos units.The Jensen AWM970 is on its second failure. Does anyone know of a quality unit that can replace it. The cutout i...