There was a post on here awhile ago Fan Install thread on replacing this fan and adding a wall switch versus the supplied switch. I'm not that versed with electric so i had a question how was this wired to make it operate correctly? Thanks in advance...
I probably should have stated originally my trailer had this fan I just replaced it ad it burned up and wanted to bypass the provided switch with a wall switch like another member had done just am not sure about wiring it.
YamaDooed wrote:I'm not sure why they needed to run two wires down the wall to the new fan switch. You normally only need to pull one black wire from the new switch to the new fan wire. (with a wall switch my option would be to bypass the new fan pus...
jfkmk wrote:You don't need to bypass the switch on the fan itself, just turn it on and leave it on. Run the positive (hot) wire to the new wall switch first then back up to the hot side on the vortex fan itself.Perfect thanks for the help electricity...
I have attached a couple of photos from the thread i originally seen this in.Do i need to bypass the black and white off the black switch completely and snake them to the new switch or just tap them all together? i can't tell where this guy tapped th...
