We have a 2007 Holiday Rambler Ambassador motorhome that we always winterize and house inside a building. We just got it out and were getting ready to go on a trip this Sunday. We hooked it up to shore power (the same as every year),and were checki...
I have a 2007 Holiday Rambler motorhome with an Onan Generator,8.0. It has approx 175 hours on it. I have had the motorhome for 4 years and the generator had 140 hours on it when I bought it. I had it serviced initially, but not since. I have pl...
We are on the road, currently in Provo, UT on the way to West Yellowstone early tomorrow morning. It is of course Sunday, so not much we can do here today. We drove in last night and just as we started to pull in the RV site, our Voyager went blan...
I have a 2007 40 ft Holiday Rambler Ambassador, 3 slides, and I have a potential problem with one of the slides. I first noticed it before I put it away for winter, but when I got it out this spring, it seems to have become worse. The outside surfa...
THANKS to all who answered my earlier post regarding Grand Junction to Prove. I have another request. Is anyone familiar with taking Hwy 2 out of Columbia Falls to Browning, MT, then Hwy 89 to Chouteau, MT, then Hwy 287 to I-90 into Bozeman with t...
I unhooked the shore power and tried it, but still no luck. I have contacted a Cummins shop in OKC, but can't get in till Tuesday next week, and it is about 100 miles south of me. I guess I should be glad diesel is less expensive right now. I will...
Sorry. The motorhome and generator are diesel. We used it earlier this summer, and it worked great. I am plugged in to shore power, but just enough to keep the batteries up. I was checking it again today and noticed that the fuse panel in the rear...
To all who read this post. It turned out to be the fuse in the console. It was a pain to locate and replace, but the Voyager is up and running. PTL! The central vac is still down. Don't have a clue as to what else to do with it. Any help would b...
Randy thanks for the reply. Too bad we're having this problem with HR's. I'm not sure that I am equipped to do this, I'll have to see. I appreciate the info. Thanks again,Mike
