I'm looking to add a 2" receiver on the front of my jeep JK so I can mount a hitch haul with some rod holders. I currently have a pair of roadmaster tow bar adapters installed. Does anyone know of an adapter that has a 2" receiver that will mount int...
Hello all, I'm trying to winterize and can't seem to keep the pink stuff out of the water heater. I've bypassed the supply side buy there doesn't seem to be a valve on the hot return side. Is there supposed to be an inline one way valve there? My sus...
Hello, I plan to flat tow my 08 Wrangler 2door with a 96 ITASCA 34RQ with a Ford 460. Has anyone done this and what should I expect. I'm a little concerned of straining the engine. I have a roadmaster blackhawk 2 rated at 10K and an even brake propor...
OK, so I've had two different people decide to shut the baggage doors on my 96' Suncruiser, not realizing that they were ripping the door latches out of the side of my MH, the kind that hold the door up and open. I'm so frustrated because I know they...
So I installed a Sea tech stop valve at the hot water out. The system did pressurize fine and no pink stuff in the WH. All is well. Thanks for the comments.
I'm starting to think I should just keep the 3500# receiver on and have a good welder beef it up to around 5K. The most I'd be pulling is 3700-4900, the GVW of the Jeep.
