I've been reading about upgrading my RV wireless repeater. I bought a JEFA Tech system a few years ago and it works good, but there's always that greener grass just over the hill... So, I was looking through my 'old' routers from my home and found th...
Well, this TT doesn't have as much side compartment storage, so I had to do something for the extra hose for the 'forward grey tank' that is just for the sink... Anyhow here's what I did for that using 4 inch sewer pvc mounted under the TT... Another...
This is the second TT that I have put mud flaps on for keeping the underside clean. I was able to screw the flaps to the inside of the wheel well on the last TT, not so on the new one. There being no wheel well I needed a way to hold the mud flap in ...
I built this generator box about 6-7 years ago and had it on a former TT. So, the new TT came into the yard and I extended the bumper using 2 1.4x2 1/4x1/8" angle with 'bed frame cross pieces. Foremost in my mind was 'save weight' but make it strong....
These are some quick photos of my Generator Box.. This is the third TT it's been on and there have been some changes. The first TT I had a Boily 3600 generator and built the box for that, which is the door on the rear (TT) side of the box.. the contr...
I bought a 'spare tire winch' from a pickup truck and mounted it under the front of the TT with the rod that turns the winch up and down out the front so I can crank it up and down with my cordless drill... I'm pretty sure there is a after market mod...
I reinforced my bumper... I extended it 30" and mounted my generator box back there...I spoke with the insurance company... no problem.. You do have to distribute weight forward to offset the added weight on the rear...
Okay, after a 6k mile trip, I am making larger mud flaps... I'll cut them from a 'semi truck' mud flap. The ones I 'bought' are too flimsy and I want something larger and less flexible..
I bought a 'new' TT last year and bought a Blue Ox hitch for it... following the 'instructions' and the 'YouTube university' instructions I deflated my Firestone bags to set up the height and 'sag' for the bars (10k bars).. The only thing is... I hav...
